1/31/2024 0 Comments Traktor s4 mk2 outputs"Traktor DJ brings real DJ tools to the masses." (The Verge) "It's wonderfully tactile and a lot of fun." (The Guardian) "Incredibly well designed and packed with great features." (WIRED) Touch your tracks and create stunning mixes in seconds. Select these channels in the Windows sound settings as described above in order to monitor the audio signal through headphones.The world’s #1 pro DJ software brings high-impact DJing to iPad. The list below shows the channels used by the headphone output of each NI audio interface. Click Apply to confirm your settings and close the window with OK.Click Set Default in order to set the selected output as your default system audio output.In our example we are choosing Output 1/2 of the Komplete Audio 6 MK2: In the Sound > Playback tab, select your interface's output channel you want to use as system output.Click Sound Control Panel on the right:.Select the output channel you want to use as system output. Note: If your sound card has multiple channels, they will appear separately in the output device list. In our example, we select Output 1/2 of the Komplete Audio 6 MK2: In the Sound / Output section, choose your output device from the drop-down menu.Click on the Windows symbol in the bottom left corner of your screen, type in ' sound settings' and press ENTER.Note: If running Windows 7 / 8, use the PDF file attached at the end of this article in conjunction with this guide. as described above in order to monitor your audio signal through your headphones. Select these channels in Configure Speakers. Click Apply and then Done to save the output routing configuration.In the below example, we are selecting Main Left and Main Right for the TRAKTOR AUDIO 10 audio interface. Click on the drop-down field below Left front and Right front to select the left and right output channels for your system output.The configuration menu will vary depending on the model of your audio interface. In the speaker setup menu you can route the system audio output to an individual channel pair (left and right) of your NI audio interface. In the Audio Devices menu, select the name of your soundcard on the left column and then click on the Output tab.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |